Tip - you can press the S key anywhere on the site to search!
Transmit uncompressed 1080p video wirelessly over 1000 feet line-of-sight with the Teradek Bolt Pro 1000 Wireless Video Transmitter/Receiver Set. Included in this set are a Teradek Bolt Pro 1000 transmitter and receiver, equipped with 3G-SDI port. The transmitter can pair with and multi-cast to up to four receivers (additional receivers not included). When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary.Transmitting across the 5 GHz frequency range, the pair utilizes Dynamic Frequency Selection (DFS) to find a clean signal between the transmitter and receiver. This is desirable when working in areas with crowded frequencies. The transmitter also features a loop-through SDI output. The USB GRAB engine streams the uncompressed video straight out of the receiver and into a PC for immediate recording. The included waterproof case with custom-cut foam carries the components during transport and storage.
The Bolt Pro 1000 transmitter and receiver pair can transmit 1080p60 video up to 1000' line-of-sight with less than 1 ms of latency when not converting video formats. The transmitter and receiver can cross convert your video signal during transmission. The hardened aluminum chassis is designed to withstand the rigors of production and features 1/4"-20 threaded mounting holes. The built-in USB port on the receiver enables direct connection to a computer, so you can capture video directly from the receiver into your computer over USB 3.0. With this video available, rough edits can be made even before the footage is offloaded from the camera. A built-in OLED information screen is built into the receiver. This enables rapid setup and confirmation of your settings. Utilizing the OLED screen, you can apply 3D LUTs with the press of a button. Upload your own LUTs using the free Bolt Manager software, or select from a number of built-in presets using Bolt's OSD.
You can select to transmit in 20 or 40 MHz channels. However, please note that while 20 MHz channels allow you to operate more wireless systems at once in a single location and offer a more robust wireless link in challenging RF conditions, they do not support audio transmission, as well as interlaced, PSF, and 1080p 60/50 frame rates. The 40 MHz channels support audio, interlaced, PSF, and 1080p 60/50.
All 3G-SDI Bolt models support metadata, timecode, and start/stop flags from many camera manufacturers, including RED, ARRI, Canon, Sony, and Panasonic.
1x Teradek Bolt Pro 1000 TX
1x Teradek Bolt Pro 1000 RX
2x D-Tap - Lemo Cables
1x Mains PSU
1x Hawkwoods XD-81 V-Lock Plate
3x Short BNC
1x Noga Arm
HD-SDI transmitter and receiver kit for wireless video over distances up to 1000ft
To make an enquiry about this product, please fill out the form below and we'll get back to you as soon as possible.